Virtual Private Network (VPN)

Virtual Private Networking (VPN) is a software tool that allows Pace end-users to connect securely to the Pace University network from off-campus (e.g. home).  Once you authenticate with your MyPace username and password, the VPN software will create an encrypted connection between your off-campus computer and the Pace network.  This will allow you to access network resources as if you were using a computer located on-campus.

Note

All users are required to be enrolled in Duo Multifactor Authentication (MFA) in order to connect to VPN.  

Connecting to the Pace VPN with Duo MFA requires the use of the Duo Mobile app, which the user must install on his/her mobile device.  If you need further assistance with this procedure, please contact the ITS Help Desk at (914) 773-3333, pacehelpdesk@pace.edu, or online at http://help.pace.edu.

Click on the following for instructions in installing Cisco AnyConnect VPN:

Connecting from the Cisco AnyConnect VPN client

  1. Open Cisco AnyConnect client and type vpn.pace.edu
  2. Click Connect
  3. Select PaceWeb_2Factor from Group drop down menu
  4. Type your MyPace Portal Username in the Username box
  5. Type your MyPace Portal Password in the Password box

    Note

    The Second Password field will require a passcode which you will need to obtain from the Duo Mobile app.


  6. Open Duo Mobile app from your mobile device

    Note

    Users with a Duo hardware token can turn the device ON by pressing the green button and skip to step 9.

  7. In the Duo Mobile app, tap Pace University key

  8. A passcode is generated from the Duo Mobile App as shown in the example below.

    Note

    The generated passcode expires after 30 seconds, so make sure to use it right away. Otherwise, click the refresh icon next to the passcode to generate a new one.

  9. On the Cisco AnyConnect screen, in the Second Password box, type the generated passcode

  10. Click OK

You should now be connected to the Pace VPN.

Note

VPN disconnects after 60 minutes of inactivity or after being connected for 8 consecutive hours. If this happens and you still need VPN access, please reconnect.


Disconnecting from the Cisco AnyConnect VPN client

  1. Double-Click (or Right-Click) Cisco AnyConnect VPN Client icon on your computer's task bar
  2. Click Disconnect

Can’t find what you’re looking for or have a topic suggestion?
Please leave a comment via our feedback form.